Showing posts with label Simcoe. Show all posts
Showing posts with label Simcoe. Show all posts

Feb 12, 2014

Brewday: Sideshow Brett - 100% Brett Baby IPA

The low gravity (aka Baby) IPA-style beer is a beer I keep coming back to. Big hop aroma, nice bitter kick but very drinkable. I know some people think it's stupid to call it an IPA when pale ale is the category for a pale hoppy beer that's lighter than an IPA. Still, I think that when the balance of bitterness is on the side of the IPA, the IPA label is appropriate and even helpful. If a label like IPA has any meaning, it's to give people an idea of what to expect before they drink it.

I've brewed several of these over the years with some good results and they're always somewhere on my torturously long list of 'what I'd like to brew next'. I've also been aiming to brew some kind of Brett IPA since August but between competitions, events and a couple of seasonal brews, I haven't been able to get to it until now. So here we are, two birds, one stone.

The yeast I used is fairly exotic. Last year my brother posted me a jar of Brett II from Saccharolicious, a home brew yeast supplier in Sweden. I've been itching to try it out in a beer but haven't gotten past making a starter. The starter gave me heaps of strawberry aroma and I'm hoping that those esters make it into the finished beer. I'm flying blind with regard to temperature and the esters it will give in primary fermentation so we'll just have to see how it goes.

The recipe is pretty much what I've used before for a 'clean' Baby IPA except for a smallish addition of flaked oats to ensure the beer has a decent body. Vienna and biscuit malt are there to maximise the malt flavour which is important in helping a low gravity beer punch above its weight. I've used it in the past with good results. With the hop combination I'm shooting for a big fruity and floral punch with plenty of bitterness to back it. Hopefully the Brett will give an extra dimension to the hops.

The good stuff! Crackerjack biscuit malt.

I'm still fairly new at 100% brett fermentations but these seem to be the key differences between a 100% brett beer and a 'clean' Saccharomyces fermentation:
  • Add some extra lactic acid/acidulated malt after the mash conversion is complete to get more fruity esters from the Brett. The lactic acid is converted during fermentation to ethyl lactate which can add creamy and fruit aromas.
  • A brett fermentation can leave a thin mouthfeel. It's a good idea to mash a bit higher than normal and maybe add flaked oats/barley/rye for body.
  • It's a good idea to grow up a bigger starter than with saccharomyces. I aimed for a pitching rate of 1.25 million cells/ml/degree plato or around 245 billion cells total. Most people seem to suggest something between standard ale and lager pitching rates.
  • Keep oxygen out! Brett tends to produce acid/funk when it's got access to oxygen, the aroma of my starter was crazy. We're talking about the stinkiest washed rind cheese smell ever, it was crazy. The original unstirred starter was all strawberry, hopefully that's what I get from the beer.
  • Fermentation temperature is a bit of an unknown for me with this yeast but it seems to be higher than I'd normally ferment an IPA. The yeast didn't come with any documentation so I'm making a guess based on WLP644 Brett Trois which says 21-29C. I started conservatively at 19C but it was sluggish until I increased it to 21C.


Hop stew: post boil hop stand
Sideshow Brett Baby IPA (22L batch)
OG: 1.035 (1.037 measured)
FG: 1.007
IBU: 35
EBC: 8.3
ABV: 3.9%

Recipe
88% Golden Promise
7% NFH Crackerjack (biscuit malt)
5% Flaked oats

5g Columbus @ 45 minutes
20g Simcoe @ 10 minutes
20g Galaxy @ 10 minutes
20g Centennial @ 10 minutes
30g Simcoe @ dry hop
30g Galaxy @ dry hop
30g Centennial @ dry hop

Brett II from Saccharolicious


Method
Mash:
  • 8g CaSO4, 2g CaCl2, 3g MgSO4 to increase the calcium and sulfate. 3ml lactic acid added during mash out to encourage the production of ethyl lactate.
  • Stepped mash: 66C (45 min), 72C (15 min) and a mash out at 78C.

Boil:
  • 60 minute boil with hop additions as above at 45 and 10 minutes.
  • Irish moss @ 15 minutes.

Fermentation:
  • Chilled but didn't oxygenate this time. 
  • Started fermentation at 20C, increased to 22C over 7 days.


31/01/14 - Brewed with help from Sacha

12/02/14 - Krausen has mostly dropped, I'll take a gravity reading in the next day or two and hopefully dry hop & bottle within the week.

22/02/14 - Finally got around to dry hopping

Jan 5, 2014

Birthday Brew #1: Brewdog Hardcore IPA Clone

For the past 3 years my friend Jason's birthday has been an occasion to gather a bunch of beer loving friends and share some interesting commercial beers. He loves good beer and has been one of my most ardent home brew supporters. This year is his 30th and he's going all out with around 20 people coming to a 2 day event centred on camping out and slow cooking some delicious BBQ.


My part in it has been to brew 3 beers for the event. Jason and I were talking about the possibilities a couple of months ago and it was obvious that hops were going to be a big part of things. Jason wanted a version of a Nelson Sauvin single hop Pale Ale we brewed several times 3 years ago so that was easy. I'd just bought Mitch Steele's IPA book and saw the Brewdog Hardcore IPA recipe. The Hardcore IPA was one of the early Imperial IPAs was available to us and it made a big impression so that seemed like a good choice too. Finally, I'd been itching to brew my Playoffs IPA again so I took the opportunity to add that one to the list. Lots and lots of hops. Unlike the wedding, this birthday is mostly made up of people I know who are relatively educated in craft beer and Jason himself loves the hoppy beer so I didn't feel like I needed to moderate my choices like I did with the wedding.

Part of the challenge of brewing a big and hoppy beer with the BIAB method and using a 40L urn is in planning for and managing the losses. As the planned OG increases, the efficiency of converting and extracting the sugars decreases. I planned for 73% efficiency, down from the 80% which is my normal level, and ended up with 72% so I was pretty close. The good thing is that this information allows me to plan some other big beers with more confidence. Along with reduced efficiency, more hops means more wort losses at the end of the brew with the trub and hop debris left at the bottom of the urn. So factoring all of that in I was aiming for 15.5L of finished beer instead of the 19.5-21.5L I normally get.

In addition to the quantity challenges, I've also found quality a bit lacking in the higher ABV beers I've brewed. They've tended to be good but not great, often suffering from off flavours. I've managed to get off flavours through an inadequate pitch of yeast, high alcohol levels or insufficient O2 stressing the yeast and high fermentation temperatures. I've collected the whole set. So with this one I was trying to do everything I could to make sure the yeast was happy and the fermentation was clean. I oxygenated the wort for 2 minutes, twice what I do for a beer in the 1.050s and I built up a massive pitch of yeast (an estimated 330 billion cells). Everything went quite well and the only problem with it was that it didn't ferment all the way down to the 1.014 I was after. With hindsight, I think I should have picked up some yeast nutrient to give them a little extra love and perhaps mashed lower than the 65C I went with.

Brewdog Hardcore IPA Clone (17L batch)
OG: 1.083 (1.082 measured)
FG: 1.014 (1.020 measured)
IBU: 148
EBC: 21.8
ABV: 9% (8.3% measured)

90% Maris Otter
6.5% Caramalt
3.5% Simpsons light crystal

25g Columbus @ 75 minutes
25g Centennial @ 75 minutes
12g Columbus @ 60 minutes
12g Centennial @ 60 minutes
33g Columbus @ 0 minutes
33g Centennial @ 0 minutes
33g Simcoe @ 0 minutes
50g Columbus @ dry hop

Estimated pitch of 330 billion cells of WLP 090

120 seconds of oxygen

I added 200g acidulated malt to correct the mash pH and added 11g CaSO4, 2g CaCl2, 3g MgSO4 as the recipe said to burtonise the water. I wasn't keen to push the sulphate levels higher than I did although I may test the limits of that another time.

Stepped mash: 65C (45 minutes), 72C (15 minutes) and a 78C mash out.

14/12/13 - Brewed with Huw

24/12/13 - Added 50g Columbus dry hops

28/12/13 - Bottled

Tasting notes

Jan 3, 2014

Wedding Beer Catchup #3: The Lorax Pale Ale

Earlier in the year I brewed a beer with my friends Adam and Will. It was a simple extract pale ale with some Weyermann CaraAmber for a bit of interest. It was hopped with Simcoe and Columbus and turned into an easy drinking, 4.6% pale ale with a huge tropical fruit juice flavour and aroma. When Adam asked me to brew for his wedding, this was one of the beers he wanted.

Instead of doing an extract batch, I decided to translate the recipe into all grain. True to form, I ended up playing with the recipe a bit so that the similarity between this recipe and the original is mainly in the hopping. I got some biscuit malt from Bill, a great bloke up in Launceston, who's been malting and roasting barley at home. Crackerjack, his biscuit malt reminds me heaps of Sao crackers we used to have growing up. My first batch using his malt got infected so I was keen to give it a shot here. I also increased the OG a little because the other wedding beers were all planned to be between 3.5-4.5% abv.

The Lorax Pale Ale (21L batch)
There's no real connection between the two except for the colour
OG: 1.051
FG: 1.011
IBU: 38 (estimated)
EBC: 10.1
ABV: 5.3%

95% Golden Promise
5% Not For Horses Crackerjack malt

30g Simcoe @ 60 min
30g Simcoe @ 0 min
50g Simcoe @ Dry hop
50g Columbus @ Dry hop

1.5L starter of WLP 090 (estimated pitch of 230 billion cells), fermented at 18C

60 seconds of oxygen

I added 8g CaSO4, 2g CaCl2, 3g MgSO4 to the mash to raise the calcium and get the sulphate levels to enhance the hoppiness and 125g acidulated malt for mash pH correction.

Stepped mash: 66C (40 minutes), 72C (15 minutes) and a 78C mash out.

30/11/13 - Brewed with Adam and Will

8/12/13 - Added dry hops

14/12/13 - Bottled

Tasted on 11/01/14

Aug 26, 2012

Brewday: Playoffs IPA 2.0

It's great to be getting back into the rhythm of brewing. Even though I'm in the middle of a month off drinking alcohol, I'm enjoying producing it and the anticipation for tasting these brews is high. Yesterday I brewed up a slightly modified version of the Playoffs IPA I brewed back in April. I was really happy with how it turned out the first time and I'm excited to get this version into the bottles and drinking.

I bought 1kg bags of Simcoe and Columbus hops a while back so I went a little crazy with the hop additions. Along with a dose of Amarillo they are the stars of the beer. I also reduced the pale malt percentage a little and increased the rye and crystal malts slightly. The beer is fermenting away in the fridge at a happy 18'C and it's making the whole room smell like tropical fruit punch. I'm going to dry hop it in a day or two with 40g each of Simcoe, Columbus and Amarillo.

Big bag o' hops
This was my second go at using my urn and it went better than the first time but I still missed some of my targets. I ended up with more pre-boil liquid than I was aiming for and needed a longer boil to get the gravity near what I planned. Still, I now have 18l of a 1.060 IPA (I was aiming for 1.062) doing its thing in the fermenter so things aren't too bad. Hopefully over the next couple of batches I'll get it dialled in properly.

Now the plan is to build up a starter of my saison yeast (WY 3725) and have that ready to go as soon as the IPA is done. I can't wait to get that yeast cranking in a beer at 27 or 28'C now that I have a temperature controller and see what flavours it gives.
Related Posts Plugin for WordPress, Blogger...